Oak Natural Unsealed £55.00
(per Square Metre)

Engineered 210 x 20 mm


Was £59.58 Now £55.00 per m2 Excluding VAT

This floor gives customers maximum control over the final appearance.

This is one of our structural engineered oak floors. These floors have a micro bevelled edge and a thicker wear layer, they are suitable for most types of fitting method including installation over under floor heating.

(We advise that 240 mm boards are fixed to the subfloor when being used with under floor heating)

This product is supplied sanded and filled requiring only a minimum fine sand prior to the application of finish after installation.

Also available in the following sizes:

135 x 20 mm
160 x 20 mm

180 x 20 mm
210 x 20 mm
240 x 20 mm

All prices exclude VAT
Contact our sales team Order a sample
  • Product Code:
Expertly Engineered
See how our wood is made

Share this floor


Enter your details to calculate your meterage and cost.

  • Width: (m)

  • Length: (m)

  • Product code:
  • Grade:
    Engineered Flooring
  • Species:
  • Group:
    Engineered Flooring
  • Category:
    Engineered Board
  • Type of Finish:
  • Brushed:
  • Profile:
    Tongue and Groove
  • Specification:
    Bevelled Edge
  • Unit Weight:
  • Recommended Use:
    Domestic and Light Commercial
  • Size:
    210 x 20 mm
  • Width:
    210 mm
  • Thickness:
    20 mm
  • Length:
  • Suitable for underfloor heating:
<span style='font-weight: bold;'>Nail Fitting</span><br />Nail fixing is usually done via a nail gun e.g Porta-Nailer where a serrated nail is inserted through the tongue at 45 degrees. <span style='font-weight: bold;'>Stick Down</span><br />Sticking involves the use of an adhesive to bond the wood flooring to either a concrete/screed sub floor or to a ply/chipboard sub floor. <span style='font-weight: bold;'>Floating</span><br />A floating floor is not physically connected to the sub floor. Normally laid on an underlay the floor is joined by gluing the tongue and groove together or by using a click system. <span style='font-weight: bold;'>Under Floor Heating - Suitable</span><br />This product is compatible for use over an electric or water under floor heating system. The maximum temperature must not exceed 27 degrees at the floor surface. <span style='font-weight: bold;'>Engineered</span><br />2 part Engineered floor with a Hardwood top surface bonded to a multilayer waterproof Russian Birch Plywood, can be Nailed, Stuck Down or Floated depending on the sub floor. All floors are Tongue and Groove with Ends Matched unless stated otherwise. <span style='font-weight: bold;'>Micro Bevelled (Sides Only)</span><br />Micro Bevelled means a very small v can be seen on the long sides of the boards, the ends have no bevel.